ds13004 rev. 10 - 2 1 of 3 b220/a-b260/a www.diodes.com diodes incorporated b220/a - b260/a 2.0a surface mount schottky barrier rectifier maximum ratings and electrical characteristics @ t a = 25c unless otherwise specified guard ring die construction for transient protection ideally suited for automatic assembly low power loss, high efficiency surge overload rating to 50a peak for use in low voltage, high frequency inverters, free wheeling, and polarity protection application high temperature soldering: 260c/10 second at terminal available in lead free finish/rohs compliant version (note 3) single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. mechanical data case: sma/smb case material: molded plastic . ul flammability classification rating 94v-0 moisture sensitivity: level 1 per j-std-020c terminals: solder plated terminal - solderable per mil-std-202, method 208 also available in lead free plating (matte tin finish). please see ordering information, note 5, on page 2 polarity: cathode band or cathode notch marking: type number approximate weight: sma 0.064 grams smb 0.093 grams no suffix designates smb package a suffix designates sma package dim sma smb min max min max a 2.29 2.92 3.30 3.94 b 4.00 4.60 4.06 4.57 c 1.27 1.63 1.96 2.21 d 0.15 0.31 0.15 0.31 e 4.80 5.59 5.00 5.59 g 0.10 0.20 0.10 0.20 h 0.76 1.52 0.76 1.52 j 2.01 2.30 2.00 2.40 all dimensions in mm a b c d g h e j notes: 1. thermal resistance: junction to terminal, unit mounted on pc board with 5.0 mm 2 (0.013 mm thick) copper pad as heat sink. 2. measured at 1.0 mhz and applied reverse voltage of 4.0v dc. 3. rohs revision 13.2.2003. glass and high temperature solder exemptions applied, see eu directive annex notes 5 and 7. characteristic symbol b220/a b230/a b240/a b250/a b260/a unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 20 30 40 50 60 v rms reverse voltage v r(rms) 14 21 28 35 42 v average rectified output current @ t t = 100c i o 2.0 a non-repetitive peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (jedec method) i fsm 50 a forward voltage @ i f = 2.0a v fm 0.50 0.70 v peak reverse current @ t a = 25c at rated dc blocking voltage @ t a = 100c i rm 0.5 20 ma typical total capacitance (note 2) c t 200 pf typical thermal resistance, junction to terminal r jt 20 c/w typical thermal resistance, junction to ambient (note 1) r ja 25 c/w operating and storage temperature range t j, t stg -65 to +150 c features
ds13004 rev. 10 - 2 2 of 3 b220/a-b260/a www.diodes.com xxxx = product type marking code, ex: b220a (sma package) xxxx = product type marking code, ex: b230 (smb package) = manufacturers code marking yww = date code marking y = last digit of year ex: 2 for 2002 ww = week code 01 to 52 yww xxxx(x) * x = device type, e.g. b260a-13 (sma package); b240-13 (smb package). notes: 4. for packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. 5. for lead free finish/rohs compliant version part number, please add "-f" suffix to the part number above. example: B250-13-f. device * packaging shipping b2xxa-13 b2xx-13 sma smb 5000/tape & reel 3000/tape & reel ordering information (note 4 & 5)
ds13004 rev. 10 - 2 3 of 3 b220/a-b260/a www.diodes.com 0.01 0.1 1.0 10 0 0.2 0.4 0.6 0.8 1.0 i , instantaneous forward current (a) f v , instantaneous forward voltage (v) f fi g .2 t y pical forward characteristics b220 thru b240 b250 thru b260 t - 25oc j i pulse width = 300 ms f 0 10 20 30 40 5 0 110100 i , peak forward surge current (a) fsm number of cycles at 60 hz fi g . 3 max non-repetitive peak forward sur g e current single half-sine-wave (jedec method) 10 100 1000 0.1 1 10 100 c , total capacitance (pf) t v , reverse voltage (v) r fi g .4 t y pical total capacitance t = 25c j f = 1mhz 0 20 40 60 80 100 120 140 i , instantaneous reverse current (ma ) r percent of rated peak reverse voltage (%) fi g . 5 t y pical reverse characteristics t = 100c j t = 75c j t = 25c j 100 10 1.0 0.1 0.01 0.001 0 0.5 1.0 25 50 75 100 125 150 i average forward current (a) o, t , terminal temperature (oc) t fi g . 1 forward current deratin g curve 1.5 2.0 2 .5
|